OP-COM - PC based Opel diagnostic program

Description

• It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
• The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
• The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
• Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
• PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
  
• Fault codes will be shown with all available information:
• Full fault code text description
  
• Full status information (Present, Not present, Intermittent)
• You can print out, save, or copy the fault codes to any other application.
  
• From the fault codes window, you can go directly to the measuring blocks window.
  
• The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
  
• You can also run output tests on many controllers.
  

PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN  - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

• You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.
• With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm.
  
• You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
  
• You will need the vehicle security code, which can be found on the CAR-PASS.
  
• You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
  
• You can code SAB6, and SAB8 airbags with the software.
  
• The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
  
• The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

Packing Including

• 1 x USB port based diagnostic interface, with USB cable
• 1 x Software Download and Activation

• Unzip it, you can find 6 files.
  
• Creat a OP-COM folder in C:
  
• Run OP-COM-080704-PLR.exe to install it to the OP-COM folder in C:
  
• Delete the OP-COM icon on the desktop.
  
• Copy OP-COM-080704-PL.exe and paste it in the folder OP-COM in C:
  
• Run OP-COM-080704-PL.exe in the folder OP-COM in C: (You can also send it to your desktop for quick starting!)